In this guide8 sections
- Which wage rules apply to dealership workers?
- Salespeople, F&I and service advisors: commissions and overtime
- Commission plans, chargebacks, deductions and final pay
- Flat-rate technicians: piece-rate rules, comebacks and tools
- Meal and rest breaks at dealerships
- Retaliation protections for dealership workers
- What you can recover and what to do
- Frequently asked questions
California car dealership workers are owed minimum wage for every hour, paid rest breaks, meal breaks, and daily overtime unless they truly meet the commission exemption, and flat-rate technicians must be paid separately for waiting time, comebacks and rest breaks on top of their flag hours.
Commission plans can hide unpaid wages. A salesperson who works 50 hours in a slow week and earns a single $250 commission is owed at least $845 in total pay at the 2026 state minimum wage, and because that week’s earnings fall below the commission exemption’s floor, overtime applies too. A flat-rate tech with six unpaid hours a week waiting on parts is owed at least $101.40 a week, over $5,000 a year. (Hypothetical.)
This guide covers car salesman labor laws in California and the rules for F&I managers, service advisors, flat-rate technicians and lot porters. General retail sales jobs are covered in our retail worker rights guide.
- Commissioned salespeople are exempt from overtime only in pay periods when they earn more than 1.5 times the minimum wage and more than half their pay is commissions.
- Your commission plan must be in writing, explain how commissions are calculated and paid, and be signed (Labor Code 2751).
- Flat-rate technicians are piece-rate workers: waiting time and meetings must be paid separately, at least at minimum wage (Labor Code 226.2), and so must unpaid comeback work.
- Commissioned and flat-rate workers must get separate pay for rest breaks; a draw or flag hours do not cover them.
- A dealer can make you supply your own hand tools only if you earn at least twice the minimum wage.
Which wage rules apply to dealership workers?
A dealership is in the business of selling vehicles at retail, so its employees are generally covered by Wage Order 7, the mercantile order. That usually includes the service department and lot staff, because coverage generally follows the employer’s main business. A stand-alone repair shop, body shop, car wash or rental agency is usually under Wage Order 9, which covers “repairing, parking, rental, maintenance, or cleaning of vehicles.” The core rules are the same under both:
- Minimum wage for every hour: $16.90 an hour statewide in 2026, rising to $17.40 on January 1, 2027, and more in many cities. The wage order says this applies whether you are paid by the hour, piece, commission “or otherwise.”
- Overtime: time and a half after 8 hours in a day or 40 in a week, and double time after 12 hours in a day, unless an exemption applies.
- Written pay formula: the dealer must give you the piece rates or incentive plan formula.
Federal law exempts dealership salespeople, partsmen and mechanics from federal overtime. California has no such exemption.
Salespeople, F&I and service advisors: commissions and overtime
The commission exemption in Wage Order 7 removes overtime only when two tests are both met:
- Earnings test: your earnings exceed 1.5 times the minimum wage for every hour worked. At the 2026 state minimum wage, that is more than $25.35 an hour ($26.10 in 2027).
- Commission test: more than half of your pay is commissions.
Courts have held that the earnings test is applied pay period by pay period, and commissions paid later cannot be assigned to an earlier period to fix a shortfall. Dealers may pay commissions once a month (Labor Code 204.1), which can leave some pay periods short. In a slow period, you may be owed overtime even if your plan calls you exempt.
Courts have also held that a flat fee per car sold can count as a commission because it rises and falls with the number of cars you sell. Hourly pay and guaranteed minimums are not commissions.
Draws. A draw is an advance against future commissions. Either way, the dealer must pay at least minimum wage for all hours each pay period. Whether you must repay an unearned draw depends on your written plan, but a dealer generally cannot take back wages already earned (Labor Code 221).
F&I managers are usually paid commissions on financing and add-on products, so the same two-part test decides overtime. Calling an F&I or sales manager an exempt manager generally requires a guaranteed salary of at least $70,304 a year in 2026 and duties that fit the exemption.
Service advisors are exempt from federal overtime under a 2018 U.S. Supreme Court ruling, but that ruling does not decide California law. For advisors paid commissions on repair orders, state overtime often turns on the same two-part test.
Commission plans, chargebacks, deductions and final pay
Labor Code 2751 requires a written commission contract that explains how commissions are computed and paid. The dealer must give you a signed copy and get your signed receipt. See our guide to unpaid commissions and bonuses.
- Chargebacks: courts have generally allowed chargebacks of commissions that were advances, when the written plan says a commission is not earned until a condition is met (for example, the deal funds or the warranty is not cancelled). A chargeback the plan does not authorize may be an unlawful deduction.
- Damage and shortages: the dealer cannot deduct for damage to a demo or customer car or lost keys unless it was caused by your dishonest or willful act or gross negligence (Wage Order 7, section 8).
- Expenses: gas, mileage on your own car for dealer trades or parts runs, and work phone use are generally reimbursable (Labor Code 2802).
When you leave, earned commissions are due with your final pay: on your last day if you are fired or give 72 hours’ notice, or within 72 hours if you quit without notice. According to the Labor Commissioner, a commission still waiting on a condition, such as funding, is due as soon as the condition is met, and a dealer cannot forfeit earned commissions because you quit. Late final pay can trigger waiting-time penalties (Labor Code 203); see our final paycheck guide.
Flat-rate technicians: piece-rate rules, comebacks and tools
Flag-hour or “book rate” pay is piece-rate pay; state guidance uses auto mechanics as an example. Courts have held that mechanics do not fit the commission exemption, so they are owed daily and weekly overtime. Under Labor Code 226.2, a piece-rate tech must be paid separately for:
- Other nonproductive time: time under the dealer’s control that is not flagged work, such as waiting for cars or parts, shop meetings, training and cleaning your bay. It must be paid at least at minimum wage.
- Rest and recovery periods: at the higher of your average hourly rate for the week or minimum wage.
Courts have held that a dealer cannot average flag-hour earnings over all clocked hours to meet minimum wage, so hours spent redoing a “comeback” that pays zero flag hours must also be paid at least minimum wage. Labor Code 226.2 took effect in 2016; its one-time safe harbor for older back pay closed in 2016.
Example: Marco is a flat-rate tech paid $32 per flag hour. In a 40-hour week he flags 34 hours ($1,088) and spends 6 unpaid hours waiting on parts, in a meeting and redoing a comeback. He is owed at least 6 × $16.90 = $101.40. Over 50 weeks, that is $5,070, before separate rest-break pay, interest or penalties. (Hypothetical.)
Tools. When tools are required for the job, the employer must provide and maintain them, except that a worker paid at least twice the minimum wage can be required to provide hand tools customarily used in the trade. That is $33.80 an hour at the 2026 state rate. Lifts and other heavy shop equipment that are not hand tools are generally the dealer’s to supply.
Pay stubs. Piece-rate stubs must show the piece-rate units and rate (Labor Code 226), plus separate lines for rest-period hours, rate and pay, and for nonproductive hours, rate and pay unless the dealer pays at least minimum wage for all hours on top of flag pay. See pay stub requirements.
If your dealer pays only flag hours, or commissions don’t cover every hour, you may be owed back pay and penalties. Get a free, confidential case review.
Meal and rest breaks at dealerships
You are owed a paid 10-minute rest break per four hours worked or major fraction, and a 30-minute duty-free meal break before the end of your fifth hour.
Rest breaks must be paid. For flat-rate techs, Labor Code 226.2 requires that pay to be separate. For commissioned salespeople, courts have held that commissions, and even a draw that guarantees minimum wage, do not pay for rest time, so the dealer must pay it separately. For each workday a required meal or rest break is missed, the dealer owes one extra hour of pay at your regular rate (Labor Code 226.7). See meal and rest break premiums.
Lot porters and detailers are usually hourly, and mandatory early arrivals to move inventory count as hours worked. Outdoors, Cal/OSHA requires shade above 80°F.
Retaliation protections for dealership workers
You cannot be punished for questioning your pay:
| If you… | Protection | Law |
|---|---|---|
| Complain about unpaid commissions or file a wage claim | No firing, discipline or adverse action | Labor Code 98.6 |
| Compare pay plans or commissions with coworkers | Right to discuss your wages | Labor Code 232 |
| Report a suspected legal violation to a government agency or supervisor | Whistleblower protection | Labor Code 1102.5 |
| Report shop hazards, heat or injuries | No discharge or discrimination | Labor Code 6310 |
Losing floor rotation or repair orders after a complaint can also be retaliation. See our retaliation claims page.
What you can recover and what to do
Depending on the facts, you may recover unpaid commissions, minimum wage and overtime, separate nonproductive and rest-break pay, break premiums, expenses, interest, waiting-time penalties, pay stub penalties of $50 for the first pay period and $100 for each later one up to $4,000, and PAGA civil penalties. Most wage claims must be filed within three years, or four with an Unfair Competition Law claim; some retaliation deadlines are shorter.
- Get your pay plan in writing and keep every signed version.
- Keep deal recaps and repair orders, including chargeback notices and flagged versus clocked hours.
- Track unpaid time waiting for work, on comebacks and meetings, and missed breaks.
- Save pay stubs and receipts for tools and gas.
- Check your numbers with our wage and hour calculator.
- Get a free case review from our wage and hour attorneys before signing a new pay plan or a release.
Frequently asked questions
Can a car dealership pay salespeople commission only?
Yes, but you must still receive at least minimum wage for every hour in each pay period, plus separate pay for rest breaks.
Do flat-rate mechanics get overtime in California?
Generally, yes. California has no dealership exemption, and mechanics do not fit the commission exemption. Overtime is figured from your regular rate, which includes your flag-hour earnings.
My manager changed my pay plan mid-month. Is that legal?
A dealer can usually change a plan going forward, but it generally cannot cut commissions you already earned under the old one. Ask for the new plan signed and in writing.
Can I be charged for a deal that unwinds after I quit?
It depends on your written plan. If it says a commission is not earned until the deal funds or survives a cancellation period, the dealer may be able to charge back the advance, but it generally cannot take back wages you already earned.
Compare the rules across 6 industries, find the wage order that covers your work, and check the rights almost every California worker has, all in one place.
See all job guidesFree guides written by employment lawyers who represent workers only.
Workers only. Never employers.
At Employees First Labor Law, we represent California workers only, never employers. Our team has recovered more than $200 million for our clients, and we prepare every case as if it is going to trial. We have offices in Pasadena, Irvine, Long Beach, Pomona, Riverside, Bakersfield and Fresno, and we serve workers throughout California. Meet our team.







We represent California dealership workers, including car salespeople, F&I managers, service advisors, flat-rate technicians and lot porters, in unpaid commission, overtime, piece-rate, missed-break and retaliation claims.
- ✅ Free, confidential consultation
- ✅ We represent workers only, never employers
- ✅ Se habla español: Empleados Primero
This article provides general information about California law and is not legal advice for any specific situation. Reading it does not create an attorney-client relationship. Past results do not guarantee a similar outcome.
Questions about your own job? Talk with a California employment lawyer at our firm about what happened.